Tout
Mots-clés de produits
Veuillez entrer le compte de l'adresse e-mail
Artillery Sidewinder-X1 imprimantes 3d haute précision grande grande taille imprimante 3d double axe Z TFT tactile
Partager à:

Artillery Sidewinder-X1 imprimantes 3d haute précision grande grande taille imprimante 3d double axe Z TFT tactile

- Noir Allemagne 220V
104792861336735583

Les imprimantes européennes sont expédiées sous 30 jours.
4.93 193 Avis des Clients | Référer à la description anglaise
399 $568 30% de réduction
Economisez un extra pour utiliser l'application

Scannez le code QR pour acheter:

  • 1. Téléchargez notre application GRATUITE sur Google Play ou App Store.
  • 2. Lancez l'application et scannez le code QR pour acheter directement.

Suivez les étapes ci-dessous:

  • 1.Connectez-vous à Gearbest.com
  • 2.Ajoutez le(s) produit(s) marqué(s) à votre panier.
  • 3. Ouvrez notre application, et allez à votre panier.
  • 4.Payer votre commande pour une réduction immédiate!
  • LIVRAISON GRATUITE
    COD Ce produit prend en charge le paiement à la livraison. Suggestions: Ne passez pas de commandes avec des produits autres que payable à la livraison, sinon vous ne pourrez pas choisir ce mode.
    Expédier entre: Nov 02 - Nov 06, Délai d'Expédition Estimé: jours ouvrables Dépendant de votre choix en matière de transport, votre commande sera traitée et expediée sous quelques jours depuis nos entrepôts
  • +
  • sans intérêt Vous pouvez profiter d'un maximum de 0 versements échelonnés sans intérêt et ne pouvez pas profiter de cette offre quand vous passez des commandes avec d'autres produits
Infos Taxes Protection des Prix Avis de Non-Responsabilité Garantie de Réparation d'un An Signalez un article
Produits Recommandés Pour Vous

Commentaires de Vidéos Youtube

Descriptions

Principales Caractérisques

Ce lien est la dernière version 4 de l'imprimante
La description:

Artillery Sidewinder X1 est une imprimante 3D pour les professionnels et les amateurs. SW-X1 a un grand volume de construction de - 300 x 300 x 400 mm - conçu pour relever les défis majeurs. Plus important encore, l'utilisation d'Artillery Sidewinder X1 pour l'impression est très simple, car les deux fonctions de récupération empêchent les défauts et les pannes causés par les coupures de courant et la gigue du filament. Contrôlez le processus et définissez les paramètres sur l'écran tactile. Profitez d'une impression 3D plus facile et plus réussie!

Artillery Sidewinder X1 est une imprimante 3D de style cartésien tout-en-un ultra silencieuse

pilotes pas à pas, extrudeuse à entraînement direct, double axe Z, écran tactile TFT.

● Volume de bâtiment standard:
300 * 300 * 400mm grande taille d'impression; Vitesse d'impression maximale de 150 mm / s. Qualité d'impression haute précision, jusqu'à 50 microns.

● Installation facile et performances stables:
95% pré-assemblé, facile à installer.
Avec une conception de cadre entièrement en aluminium, structure très stable

● Fonction développée:
Système Dual Z synchronisé
Prise en charge de la détection et de la récupération de la perte de puissance.
Prise en charge de la détection et de la récupération du runout de filament

● Accessoires puissants de haute qualité:
Avec contrôle de l'écran tactile, pilote pas à pas ultra-silencieux. Et une extrudeuse à entraînement direct de style titane pour supporter des matériaux flexibles.

● Correspondance conviviale:
110v et 220v sont disponibles, adaptés à la tension de fonctionnement dans la plupart des régions du monde.

Caractéristique

Taille de l'emballage (L xlxh)
780 x 540 x 250mm
Poids de l'emballage
16,5 kg
Contenu du colis
1 x Kit imprimante 3D Sidewinder X1 1 x Kits de réparation 1 x États-Unis pour Disque 1 x prix
Voir plus

Suppose que vous aimez

Avis des Clients

4.93 sur 5
  • 179
  • 14
  • 0
  • 0
  • 0
Voir tous les avis 193 Écrire un Avis
  • WiscoPrinter
    Simply Impressive
    This was my second 3D printer, with the first one being the highly popular 3rd model that shares the same name as Orson Scott Card's most famous character, so I have some experience already. And I have to say, the experience has been phenomenal. It's printing basically out of the box the way it took me months of mods and tweaks to get on my other printer - the only things I installed before printing were a strain relief bracket and cable chain for the bed cables and an updated fan duct, based on feedback from existing Sidewinder owners. I'm now printing some extra covers and accessories (like a tool holder) and can't wait to dive into printing larger, more exciting things.

    The pros are too numerous to list. It's a robust, polished machine at a frankly phenomenal price - this is what I'd expect out of a much more expensive printer. And the cons are very minimal:

    -There seems to be a persistent firmware error that causes the Light On button in the mid-print options screen to freak out and not work. I've seen this in at least one YouTube review and that part of the screen works perfectly anywhere else, so it seems like a relatively simple software fix. I have a flashlight nearby anyway.

    -The X-axis endstop had two minor issues - it needed to be unplugged and re-plugged before it would register at all (the connector looked like it was seated properly but apparently that's not the case) and it didn't seem far enough over to register off of the metal parts of the extruder carriage. I didn't want to move the entire circuit board so as to not cause a twist in the ribbon cable, so I swapped the M3-12 bolt for an M3-25 and added some washers behind the sensor so it would pick up on the metal of the extruder assembly.

    -The tools included seem to be of high quality but two critical tools from my printing experience seem to be missing: a bed scraper and a flush cutter. You could argue that the scraper shouldn't be necessary because of the glass bed, but the coating on the glass is really sticky - I've had to pry pretty hard with the scraper I have and haven't even cleaned the bed in between each print as I do on my other machine. And flush cutters are nice for trimming off the ends of filament, removing brims, and the like.

    These concerns are minor and either were solved quickly or could be solved in a future update. I wouldn't necessarily recommend this as a first printer - it's easier to cut your teeth on a $200 machine that can be upgraded more easily than something polished like the Sidewinder - but as a second printer, I think it'd be top notch in its size class even without factoring in the great price.

    Aug 10,2020

  • AlexHH
    Top Drucker zum unschlagbaren Preis
    Der Drucker kam knapp 5 Werktage nach Bestellung via DHL zu mir nachhause. Die Verpackungsweise kann ich nur als TOP bewerten. Alles in Schaumstoff sicher verpackt so dass nicht beschädigt werden konnte. Der Aufbau erwies sich als extrem simpel. Es liegt zwar eine deutsche Anleitung bei (kein Ikea deutsch!) - aber diese kann man mit gesundem Menschen Verstand getrost zur Seite legen, da das meiste wirklich selbsterklärend ist. Das Leveling vom Druckbett ist binnen weniger Minuten erledigt. Das einrichten in Cura 4.4.1 ist anhand der Anleitung auf dem USB Sticken auch schnell getan. Das passende Druckprofil habe ich mir via Youtune von Phillip's gezogen und damit aus PLA einen Benchy gedruckt. Das aufheizen vom Bett auf 60°C dauert keine 20 Sek. und der Extrudor hat nach ca. 50 Sek. die 205°C temperatur erreicht. Der Lärm ist im Vergleich zu meinem Zweitdrucker (Anycubic Mega S) ein Unterschied wie Tag und Nacht. Man könnte sich glatt daneben schlafen legen so ruhig ist er. Die LEDs (4 farbig und einstellbar) unterhalb des Extrudors sind sehr hilfreich um den ersten Layer einschätzen zu können.

    Meine Druckparameter:
    PLA (Amazon Basic White)
    Bett temp: 60°C
    Anfängliche Drucktemp: 205°C
    Weitere Drucktemp: 195°C
    Geschwindigkeit: 60 mm/sek
    Infill: 15%

    Anmerkungen:
    1.) Ich habe die Erfahrung gemacht das wenn man vom USB Stick drucken möchte und Parallel der PC via USB-Kabel dran hängt, es zu merkwürdigen Fehlern kommt. Bei mir heizte der Extrudor garnicht bei starten des USB-Stick Druckauftrags. Also lasse ich das USB Kabel weg, da ich ehe immer via Stick drucke.
    2.) Das 230V Kabel vom Druckbett wirkt wenig Vertrauenserweckend. Es gibt dafür auf Thingiverse aber eine Abhilfe (Sucht einfach nach dem Druckernamen).

    Alles in einem: Ein hervorragender Drucker (Qualitativ) der wirklich sehr günstig ist und sowohl für Anfänger als auch Fortgeschrittene geeignet ist! Lieferungszeit und Verpackungsweise sind 1A+++. Ich würde ihn jederzeit wieder kaufen!

    Jan 16,2020

  • Dar es salaam
    Faster 3d printer I ever seen
    This machine checked all the boxes for me:
    1. Large format (300x300x400 build area) The bed is slightly over sized so it is a fully use able area.
    2. Volcano hotend- it appears to not be a genuine but seems to work quite well. It comes with a .4 nozzle. This works quite well but I imagine down the road I will put at least a .8 nozzle on this machine.
    3. Filament runout sensor- it mounts at the top of the machine and initiates an automated routine controlled by the touch screen.
    4. TOUCH SCREEN! Capacitive! Works quite well, I was worried about the size but the menus and general use work quite well.
    5. Low price but with support included- in all my interactions with Artillery 3D they have been amazing to deal with. Helped walked me through a couple hiccups with kindness and understanding. Very odd to see as I don’t see that kind of service with very large companies I deal with.
    6. Silent Drivers- The only Noise is a subtle fan noise. If my robos are on (not printing- just on) I can’t hear this machine running.

    The machine is very low maintenance and so easy to use. It is sturdy as well with an all metal frame and barely wobbles. I assembled the Artillery 3D printer and I got to print my first print within 30mins. Print quality is amazing. Mark my words, this is going to be a game changer in 2019. I wanted to let you know that this is one of the highest quality printers I have ever used! You guys have done an excellent job!

    So far I have been thrilled. I have not had much time with the machine but have printed some things and am tuning a Simplify 3D.

    Overall, for anyone who is looking for an easy intro to 3D printing this is definitely a good choice.

    Jul 11,2019

  • Dar es salaam
    Faster 3d printer I ever seen
    This machine checked all the boxes for me:
    1. Large format (300x300x400 build area) The bed is slightly over sized so it is a fully use able area.
    2. Volcano hotend- it appears to not be a genuine but seems to work quite well. It comes with a .4 nozzle. This works quite well but I imagine down the road I will put at least a .8 nozzle on this machine.
    3. Filament runout sensor- it mounts at the top of the machine and initiates an automated routine controlled by the touch screen.
    4. TOUCH SCREEN! Capacitive! Works quite well, I was worried about the size but the menus and general use work quite well.
    5. Low price but with support included- in all my interactions with Artillery 3D they have been amazing to deal with. Helped walked me through a couple hiccups with kindness and understanding. Very odd to see as I don’t see that kind of service with very large companies I deal with.
    6. Silent Drivers- The only Noise is a subtle fan noise. If my robos are on (not printing- just on) I can’t hear this machine running.

    The machine is very low maintenance and so easy to use. It is sturdy as well with an all metal frame and barely wobbles. I assembled the Artillery 3D printer and I got to print my first print within 30mins. Print quality is amazing. Mark my words, this is going to be a game changer in 2019. I wanted to let you know that this is one of the highest quality printers I have ever used! You guys have done an excellent job!

    So far I have been thrilled. I have not had much time with the machine but have printed some things and am tuning a Simplify 3D.

    Overall, for anyone who is looking for an easy intro to 3D printing this is definitely a good choice.

    Jul 11,2019

  • Eurosat
    Rough start, but amazing product overall
    The package I received was really well made, all the parts of the printer were secured with care. The instruction are really clear, they walk you through the assembly and set up of the printer with all the important details. The product come with straps to secure all the axis and all the cables are tied with tape so they don't move during the shipping. On the package side they did a majestic job.

    They provide you with an extra set of flat cables, a really cool pouch, a USB pen, all the tools needed to assembly and disassembly the printer, an extra nozzle and some more spare parts.

    The "rough start" I mentioned in the title refers to the first step of the assembly (wich is the only real assembly you have to do) where you have to mount the vertical frame on the base. I probalby got the only X1 of the entire lotto where the vertical frame could not fit because the housing on the base was too narrow. I fixed things with a file and a bit of patience.

    Execpt this little settleback, the rest of the assembly was easy, and the printer was set and calibrated in the next 30 minutes for the test print. Even for a noob like me, the interface of the printer is really comprehensible and easy to use.

    This was my first 3d printer and I'm really enjoing it, i built a couple of things that I need for school project and I'm satisfied with the result. A thing that I really like is the fast heating, because I usually "babysit" the first part of the print to see if there is something wrong. A big plus is that during the print the machine is really quiet, so you don't have to worry with loud noises during the night print.

    Plus, the Sidewinder looks really cool!

    Jul 25,2020

Produits sponsorisés liés à cet article
Vos articles vus récemment

Voir des recommandations personnalisées

Nouveau client? Commencer ici
Service Après-Vente